潍坊市鑫升机械制造有限公司   中文版 英文版
鑫升机械电话:13780817723
 
“OUQI”Medium and small tractors,The main products are:OQ-354 type、OQ-404 type、OQ-504 type、OQ-554 type、OQ-1254 type、OQ-1354 type、OQ-1454 type……
 
 
Weifang Xinsheng Machinery Manufacturing Co.,Ltd,
TEL:+86-0536-8135333
FAX:+86-0536-8133777
Mobil: +86-13780817723
Skype: willychinatractor
We-chat: zhou13780817723
QQ: 401837940
E-mail:xinshengofchina@163.com
ADD:Wangliu Town,Weicheng District,Weifang,Shandong,China
News Center

Attention items for tractor hydraulic steering gear

    The use of full hydraulic steering tractor, Weifang City, Xin Sheng Machinery Manufacturing Co., Ltd. in the use of the process should pay attention to the following points:

(1) regular inspection of the threaded joints, if there is a loose and timely tightening. When the hydraulic steering system works, there is no leakage of oil leakage.

(2) often check the liquid level of the tank, and add it to the request.

(3) the use of the process, such as the discovery of a heavy or failure, should be the first to find out the reasons for the first, not hard pull the steering wheel, not to easily open the steering gear, in order to prevent damage to parts. No two people at the same time to turn the steering wheel.

(4) when installing the full hydraulic steering system, the steering gear shall ensure that the steering shaft is coaxial with the steering shaft and the axial clearance. Check the steering wheel back to the position after installation.

(5) must ensure that the oil is clean. For this purpose, we should always check the filter element and oil. Check method: a drop of oil to the oil blotting paper, such as a black center, which should be replaced oil.

(6) after the replacement of the new oil, the gas in the oil tank shall be discharged. Exhaust method: the steering cylinder bolt joint release, so that the oil pump at low speed operation of the gas, until the flow of oil in the oil does not contain foam.
Remove steering cylinder piston rod and steering wheel, turn the steering wheel, so that the piston to the left or the right position (in the two extreme position do not stay), and then to the fuel tank to the highest oil level.

Tighten all threaded connections (not in the case of pressure), connecting the piston rod. Check the steering system under various working conditions, the work is normal.

(7) the constant current overflow pump is a precision part, generally not allowed to disassemble.
Attention items for tractor hydraulic steering gear 0 This article has been read 0 次
On a:Tractor fuel five coupUnder a:Common malfunction and troubleshooting of tractor clutch
 
Copyright:Weifang Xinsheng Machinery Manufacturing Co.,Ltd,      ADD:Wangliu Town,Weicheng District,Weifang,Shandong,China
TEL:+86-0536-8135333      FAX:+86-0536-8133777      



公示信息